Your energy bills drop. Not by a little—by enough that you’ll notice it in your operating budget. When dirt builds up on your heating and cooling coils, even just half an inch of buildup forces your system to work 21% harder. That’s wasted energy you’re paying for every single month.
Your employees stop calling in sick as often. Poor indoor air quality contributes to respiratory issues, headaches, and that general “I don’t feel great” feeling that leads to absenteeism. Buildings with better air quality see up to 35% fewer sick days. That’s real productivity you’re getting back.
Your HVAC system stops breaking down at the worst possible times. Clean ductwork and components mean less strain on your equipment. Less strain means fewer emergency repair calls and a system that actually makes it to its expected lifespan instead of dying early.
We’ve been cleaning commercial HVAC systems across Alamance County and the Greensboro area since the early 1990s. We’re not new to this, and we’re not learning on your building.
Our team includes NADCA certified Air System Cleaning Specialists—Rick Watson and Noah Watson both hold ASCS and CVI certifications. That means we understand HVAC design, airflow dynamics, and the actual cleaning methodologies that work. Not every duct cleaning company can say that.
We’re BBB accredited with an A+ rating because we show up when we say we will, do the work right, and don’t try to upsell you on things you don’t need. Alamance businesses need reliable service from people who know what they’re doing—that’s what you get here.
We start with an inspection of your entire HVAC system. That means looking at your ductwork, your air handlers, your coils, and your vents. We’re checking for buildup, damage, mold growth, and anything else that’s affecting your air quality or system performance.
Then we clean it—properly. We use negative air pressure systems and HEPA-filtered vacuums to pull contaminants out of your ductwork without spreading them around your building. We physically brush and agitate surfaces to break loose the debris that’s stuck. We clean supply ducts, return ducts, registers, grilles, coils, and drain pans.
After the cleaning, we do a final walkthrough with you. You’ll see the difference in how much debris we removed, and your system will run quieter and more efficiently. We work around your business hours when possible, so you’re not shutting down operations for a full day.
Ready to get started?
You’re getting a complete cleaning of your air distribution system—not just the ducts you can see. That includes supply and return air ducts, registers and grilles, diffusers, heating and cooling coils, condensate drain pans, fan motors and housings, and the air handling unit housing.
In Alamance County, we’re seeing a lot of manufacturing and industrial facilities with combustible dust issues. If that’s you, duct cleaning isn’t just about air quality—it’s about fire risk reduction. Dust buildup in your HVAC system is a legitimate hazard, and regular cleaning keeps that risk in check.
For office buildings and healthcare facilities around Alamance, the focus is usually on indoor air quality and regulatory compliance. OSHA and EPA guidelines require routine maintenance of air-handling systems, especially in environments where employee health is directly tied to air quality. We make sure you’re meeting those standards without the headache of figuring out what compliance actually looks like.
It depends on what kind of facility you’re running. NADCA recommends inspecting your HVAC system annually and cleaning it when there’s visible debris, mold growth, or a noticeable decline in air quality or system performance.
Manufacturing facilities, restaurants, and healthcare buildings usually need cleaning every one to three years because of the contaminants they generate—dust, grease, chemicals, or biological matter. Office buildings can often go three to five years if the system is well-maintained and there aren’t any air quality complaints.
If you’re seeing higher energy bills, more employee sick days, or musty odors coming from your vents, don’t wait for the schedule. Get it inspected. Waiting too long means you’re paying more in energy costs and risking bigger problems down the line.
Yes, but the savings depend on how dirty your system is right now. If your coils and ductwork are caked with dust and debris, your HVAC system is working significantly harder than it should be. Just 0.42 inches of dirt on a heating or cooling coil can reduce efficiency by 21%.
When we clean your system, airflow improves, heat exchange becomes more efficient, and your equipment doesn’t have to run as long to reach the temperature you’ve set. That translates directly into lower energy consumption. Some facilities see 10-20% reductions in HVAC energy costs after a thorough cleaning.
The other benefit is equipment longevity. When your system isn’t straining against buildup, it lasts longer and needs fewer repairs. That’s not an immediate cost savings, but over the life of your equipment, it adds up to thousands of dollars you’re not spending on premature replacements.
Look at your vents and registers. If you see dust buildup around the edges or visible debris inside, that’s a sign. Pull off a vent cover if you can and shine a flashlight inside—if you see layers of dust or debris, it’s time.
Pay attention to air quality complaints from employees. If people are mentioning stuffy air, odors, or increased allergy symptoms, your ductwork could be circulating contaminants. Also watch your energy bills—if they’re creeping up without a clear reason, dirty ducts might be forcing your system to work harder.
Another red flag is uneven heating or cooling. If some areas of your building are always too hot or too cold, blockages or buildup in your ductwork could be restricting airflow. A professional inspection will tell you exactly what’s going on and whether cleaning will solve the problem.
A cheap cleaning usually means someone shows up with a shop vac and brushes out the vents you can see. They’re not cleaning the entire system, they’re not using proper containment, and they’re often spreading dust around instead of removing it. You’ll pay less upfront, but you won’t get the results you’re expecting.
A real cleaning involves NADCA-certified technicians using commercial-grade negative air machines and HEPA filtration. We create negative pressure in your ductwork so contaminants get pulled into our equipment instead of pushed into your building. We physically access your duct system at multiple points, not just the registers.
We also clean components most companies skip—coils, drain pans, blower assemblies. Those parts affect your air quality and system efficiency just as much as the ducts themselves. If someone’s quoting you a price that seems too good to be true, ask them specifically what they’re cleaning and what equipment they’re using. The answer will tell you everything.
Absolutely. Studies show that better indoor air quality improves cognitive function and decision-making by up to 60%. When your employees aren’t breathing in dust, mold spores, and other contaminants all day, they think more clearly and perform better.
Sick building syndrome is real, and it costs businesses billions annually in lost productivity. Poor air quality leads to headaches, fatigue, respiratory issues, and higher absenteeism. Buildings that improve their air quality see reductions in sick days by as much as 35%. That’s fewer disruptions, lower healthcare costs, and better overall performance.
For Alamance businesses competing for talent, indoor air quality is also becoming a workplace expectation. Employees notice when the air feels stale or when they’re constantly dealing with allergies at work. Clean ducts contribute to a healthier environment, and that affects retention and morale more than most business owners realize.
Yes. We understand that shutting down your facility for a full day isn’t realistic for most businesses. We’ll work with you to schedule the cleaning during off-hours, weekends, or in phases so you can keep operating.
For larger facilities, we can section off areas and clean them one at a time. That way, you’re not losing access to your entire building, and we’re not disrupting your workflow. We’ve done this for manufacturing plants, office buildings, and healthcare facilities across Alamance County—we know how to minimize interruption.
The actual cleaning time depends on the size of your system, but most commercial jobs take anywhere from a few hours to a full day. We’ll give you a clear timeline during the inspection so you know exactly what to expect and can plan accordingly.
Local Resources
Useful Links
